Floor Layout

Hardwood floors have an aesthetic appearance and attractiveness. They give a natural look inside your house. You can find your home for home improvement and look attractive because of the glare of the floor.

When you want to install hardwood floors, you need to do a very professional manner so that it is the right path. There should be no gaps between floors and the layout of the ground must be smooth. Before installation, it is necessary to stack the wood inside so it can get adjusted to the indoor humidity. Here's a look at the steps of installing hardwood flooring:

• Mark the floor joists before starting the installation process. Locate the center point of the room with a tape measure. Use the central point of reference for snapping a chalk line parallel to the wall where you wish to start the installation of hardwood. The subfloor should be covered with a layer of asphalt 15-Punt for protection against moisture.

• Post a difference a half inch of the wall where you decide to start the installation. This gap provides opportunities for expansion of wood. Did the gap covered by molding baseboards.

• It is necessary to choose the longest of the first board for the very first line you will install. Drill holes for 1 1/2-inch finishing nails, then fix the first row face-nailing. Be sure to drill the nail right on the subfloor and floor joists or berth. Nails can be recessed below the surface using a nailset.

• The next two lines should be kept at hand. Holes must be drilled to 45-50 degrees in the languages of the Council. The holes should be at the center of each joist or bed and it should also be secured with a 1/2-inch finishing nails.

• When installing flooring over a large area, it is necessary to use a wood floor nailer. However, be careful not to scratch the surface of the flooring in the process of aligning.

• Laying the last line requires the use of a block and a lever. This wedge the last boards in a tight position.

• When installing a new floor causes a change in the level hallway or room next level, we make a reducer strip to make way for a smooth transition. The tape can be easily mounted on the tongue of an adjacent panel.

You can install hardwood floors by yourself, otherwise you can do it professionally. Check for certifications and reliable service before choosing an installation service hardwood.